BB-A-106D
2.2 Other publications. The following documents form a part of this specification to the extent
specified herein. Unless a specific issue is identified, the issue in effect on the date of invitation
for bids or request for proposal shall apply.
American Society for Quality
ASQ Z1.4
- Sampling Procedures and Tables for Inspection by
Attributes
(Application for copies should be addressed to the American Society for Quality, 600
North Plankinton Avenue, Milwaukee, WI 53023. Electronic copies may be obtained from
https://www.asq.org/.)
ASTM International
ASTM D329
- Standard Specification for Acetone
(Application for copies should be addressed to ASTM International, 100 Barr Harbor
Drive, West Conshohocken, PA 19428-2959. Electronic copies may be obtained from
https://www.astm.org/.)
Compressed Gas Association (CGA)
CGA C-13
- Guidelines for Periodic Visual Inspection and
Requalification of Acetylene Cylinders
CGA G-1
- Acetylene
CGA G-1.1
- Commodity Specification for Acetylene
CGA G-1.9
- Recommended Practices for Maintaining the Proper
Solvent Level in Acetylene Cylinders
CGA TB-17
- Test Methods for Evaluating Paints and Coatings on
Refillable Steel Compressed Gas Cylinders
CGA V-9
- Compressed Gas Association Standard for
Compressed Gas Cylinder Valves
(Application for copies should be addressed to the Compressed Gas Association, 4221
Walney Road, 5th Floor, Chantilly, VA 20151-2923. Electronic copies may be obtained from
https://www.cganet.com/.)
3. REQUIREMENTS
3.1 Material. The acetylene shall conform to the requirements of gaseous acetylene as specified
in CGA G-1.1 and shown in table I.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business